Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these circumstances, there’s only one part of your vehicle to blame – your headlights, as well named high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this elementary manipulation, and in this post, we are going to see how to adjust the headlights of your seat ibiza? To do this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your seat ibiza.
Why adjust the headlights of your seat ibiza?
So let’s start our article with the interest of adjusting the headlights of your seat ibiza. For many of us, our headlights are adjusted good enough, and they seem to light up enough at nighttime. Sadly this is not always the circumstance and examining this setting, either because the headlights on your seat ibiza are not bright enough, or because you have the sensation that they are too weak is a good idea .
Adjusting the high beams of your seat ibiza for safety
To begin with, the headlight adjustment of a seat ibiza must be conducted for a very easy safety explanation. Whether it’s for you, or for the other users you come across during your night trips. Obviously, if you don’t see enough, the risk is to miss an obstacle driving, or to predict a curve badly. Alternatively, if your headlights are too strong, regardless if you are supposed to switch to low beam lights when you cross a vehicle, the time required to make this switch will generally expose the driver in front of you to the headlight beam of your seat ibiza . It is therefore essential for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a seat ibiza for legal reasons
In addition to safety, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a seat ibiza?
We will now proceed to the section that concerns you the most in this post, how to adjust the headlights of his seat ibiza? This setting may appear a bit complex, but by following the guidance you should have the ability to perform it without too much trouble.
Preparations to adjust the headlights of a seat ibiza
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to set up:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure attentively.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the automobile, just one person should be in the driver’s seat.
.
The headlight adjustment of his seat ibiza
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your hood, find the screws for horizontal and vertical adjustment of the headlights of your seat ibiza (they are in most cases designated, and those on top must modify the verticality and the one on the side manages the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your seat ibiza is coherent, do not hesitate to check it after you have driven it, in some cases it may move.
.
.
If you want to adjust the fog lights on your seat ibiza, please read our article on this subject matter.
If you need more tutorials on the seat ibiza, go to our seat ibiza category.
