Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these cases, there’s only one part of your car to blame – your headlights, as well called high beams. Nevertheless this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this simple manipulation, and in this article, we are going to discover how to adjust the headlights of your seat cordoba? To do this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your seat cordoba.
Why adjust the headlights of your seat cordoba?
So let’s begin our content with the benefit of adjusting the headlights of your seat cordoba. For most of us, our headlights are adjusted well enough, and they seem to light up enough at night. Unfortunately this is not constantly the circumstance and checking this setting, either because the headlights on your seat cordoba are not bright enough, or because you have the sensation that they are too weak is a wise decision .
Adjusting the high beams of your seat cordoba for safety
To begin with, the headlight adjustment of a seat cordoba must be done for a simple safety reason. Whether it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to fail to see an obstacle on your way, or to anticipate a curve badly. However, if your headlights are too strong, regardless if you are expected to switch to low beam lights when you pass a car, the time needed to make this change will most of the time expose the driver in front of you to the headlight beam of your seat cordoba . It is therefore essential for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a seat cordoba for legal reasons
In addition to safety, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a seat cordoba?
We will now move on to the part that interests you the most in this article, how to adjust the headlights of his seat cordoba? This adjustment may appear a bit difficult, but by simply following the guidance you should have the ability to perform it without too much concern.
Preparations to adjust the headlights of a seat cordoba
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all needless weight from the car, only one person should be in the driver’s seat.
.
The headlight adjustment of his seat cordoba
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your hood, locate the screws for horizontal and vertical control of the headlights of your seat cordoba (they are generally designated, and those on top must modify the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your seat cordoba is logical, do not hesitate to check it after you have driven it, in some cases it may move.
.
.
If you want to adjust the fog lights on your seat cordoba, please go through our content on this subject matter.
If you want more tutorials on the seat cordoba, go to our seat cordoba category.
