Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these scenarios, there’s only one component of your vehicle at fault – your headlights, as well named high beams. Although this adjustment might seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this simple manipulation, and in this post, we are going to see how to adjust the headlights of your saab 9 3? To get this done, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your saab 9 3.

adjust-headlights-saab-9-3

Why adjust the headlights of your saab 9 3?

So let’s start our content page with the benefit of adjusting the headlights of your saab 9 3. For most of us, our headlights are adjusted sufficiently, and they seem to light up enough at night. Sadly this is not always the circumstance and looking at this setting, either because the headlights on your saab 9 3 are not bright enough, or because you have the impression that they are too weak is a good idea .

Adjusting the high beams of your saab 9 3 for safety

To begin with, the headlight adjustment of a saab 9 3 must be made for a simple security explanation. If it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to miss an obstacle while traveling, or to predict a curve badly. Alternatively, if your headlights are too powerful, regardless if you are meant to switch to low beam lights when you cross a vehicle, the time required to make this switch will generally expose the driver in front of you to the headlight beam of your saab 9 3 . It is therefore essential for others as well as for you to have an optimal adjustment of your headlights.

Adjusting the headlights of a saab 9 3 for legal reasons

Furthermore to security, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.

How to adjust the headlights of a saab 9 3?

We will now proceed to the section that concerns you the most in this post, how to adjust the headlights of his saab 9 3? This setting might seem a bit complex, but by following the guidance you should be able to complete it without too much trouble.

Preparations to adjust the headlights of a saab 9 3

To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to executed:

  • Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Verify your tire pressure carefully.
  • Verify that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unneeded weight from the vehicle, just one person should be in the driver’s seat.

The headlight adjustment of his saab 9 3

Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:

  • Open your hood, locate the screws for horizontal and vertical modification of the headlights of your saab 9 3 (they are in most cases designated, and those on top must modify the verticality and the one on the side controls the horizontality of the adjustment).
  • Use a cloth or different things to hide the projector on which you are not making the modification.
  • Using the screws to make the horizontal modification, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
  • .

  • With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once finished, check that the headlights setting of your saab 9 3 is logical, do not hesitate to check it after you have driven it, occasionally it may move.

.
If you want to adjust the fog lights on your saab 9 3, please go through our content page on this subject.

If you want more guides on the saab 9 3, go to our saab 9 3 category.