Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these scenarios, there’s only one part of your vehicle at fault – your headlights, also named high beams. Nevertheless this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this simple manipulation, and in this article, we are going to discover how to adjust the headlights of your Renault Vel Satis? To achieve this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Renault Vel Satis.
Why adjust the headlights of your Renault Vel Satis?
So let’s begin our content page with the benefit of adjusting the headlights of your Renault Vel Satis. For the majority of us, our headlights are adjusted sufficiently, and they appear to light up enough at nighttime. Regrettably this is not constantly the case and looking at this setting, either because the headlights on your Renault Vel Satis are not bright enough, or because you have the feeling that they are too weak is a wise decision .
Adjusting the high beams of your Renault Vel Satis for safety
To begin with, the headlight adjustment of a Renault Vel Satis must be made for a basic safety motive. Regardless it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to miss an obstacle driving, or to anticipate a curve badly. However, if your headlights are too strong, regardless if you are supposed to switch to low beam lights when you cross a vehicle, the time required to make this switch will most of the time expose the driver in front of you to the headlight beam of your Renault Vel Satis . It is consequently important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Renault Vel Satis for legal reasons
In addition to safety, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Renault Vel Satis?
We will now move on to the part that interests you the most in this article, how to adjust the headlights of his Renault Vel Satis? This adjustment may seem a bit complicated, but by following the instructions you should have the ability to perform it without too much issue.
Preparations to adjust the headlights of a Renault Vel Satis
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to set up:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure attentively.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unneeded weight from the vehicle, just one person should be in the driver’s seat.
.
The headlight adjustment of his Renault Vel Satis
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical control of the headlights of your Renault Vel Satis (they are generally designated, and those on top must adjust the verticality and the one on the side manages the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Renault Vel Satis is logical, do not think twice to check it after you have driven it, in some cases it may move.
.
.
If you want to adjust the fog lights on your Renault Vel Satis, please go through our content page on this subject.
If you want more guides on the Renault Vel Satis, go to our Renault Vel Satis category.
