Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these situations, there’s only one component of your car guilty – your headlights, as well identified as high beams. Nevertheless this adjustment may seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this basic manipulation, and in this post, we are going to see how to adjust the headlights of your Renault Twingo? To achieve this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Renault Twingo.

adjust-headlights-renault-twingo

Why adjust the headlights of your Renault Twingo?

So let’s begin our content page with the benefit of adjusting the headlights of your Renault Twingo. For many of us, our headlights are adjusted sufficiently, and they seem to light up enough after dark. Unfortunately this is not always the case and looking at this setting, either because the headlights on your Renault Twingo are not bright enough, or because you have the sensation that they are too weak is a great idea .

Adjusting the high beams of your Renault Twingo for safety

To begin with, the headlight adjustment of a Renault Twingo must be done for a simple security motive. Whether it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to fail to see an obstacle driving, or to anticipate a curve badly. However, if your headlights are too strong, even if you are expected to switch to low beam lights when you cross a car, the time required to make this change will generally expose the driver in front of you to the headlight beam of your Renault Twingo . It is consequently necessary for others as well as for you to have an optimal adjustment of your headlights.

Adjusting the headlights of a Renault Twingo for legal reasons

Furthermore to security, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.

How to adjust the headlights of a Renault Twingo?

We will now go forward to the section that interests you the most in this post, how to adjust the headlights of his Renault Twingo? This adjustment may seem a bit difficult, but by following the guidelines you should have the ability to do it without too much concern.

Preparations to adjust the headlights of a Renault Twingo

To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to executed:

  • Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Verify your tire pressure cautiously.
  • Verify that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Take out all needless weight from the automobile, just one person should be in the driver’s seat.

The headlight adjustment of his Renault Twingo

Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:

  • Open your hood, locate the screws for horizontal and vertical control of the headlights of your Renault Twingo (they are usually designated, and those on top must modify the verticality and the one on the side manages the horizontality of the adjustment).
  • Use a cloth or something else to hide the projector on which you are not making the correction.
  • Using the screws to make the horizontal correction, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
  • .

  • With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
  • Once finished, check that the headlights setting of your Renault Twingo is coherent, do not hesitate to check it after you have driven it, oftentimes it may move.

.
If you want to adjust the fog lights on your Renault Twingo, please go through our content page on this subject matter.

If perhaps you have any further questions about the Renault Twingo, do not hesitate to consult our Renault Twingo category.