Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these circumstances, there’s only one part of your vehicle responsible – your headlights, as well often known as high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this basic manipulation, and in this post, we are going to find out how to adjust the headlights of your Renault Talisman? To do this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Renault Talisman.

adjust-headlights-renault-talisman

Why adjust the headlights of your Renault Talisman?

So let’s begin our content page with the benefit of adjusting the headlights of your Renault Talisman. For the majority of us, our headlights are adjusted well enough, and they seem to light up enough during the night. Regrettably this is not always the case and examining this setting, either because the headlights on your Renault Talisman are not bright enough, or because you have the feeling that they are too weak is a wise decision .

Adjusting the high beams of your Renault Talisman for safety

To begin with, the headlight adjustment of a Renault Talisman must be conducted for a basic security reason. Regardless it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to miss out an obstacle on the road, or to predict a curve badly. However, if your headlights are too strong, even if you are meant to switch to low beam lights when you pass a vehicle, the time needed to make this change will most of the time expose the driver in front of you to the headlight beam of your Renault Talisman . It is therefore essential for others as well as for you to have an ideal adjustment of your headlights.

Adjusting the headlights of a Renault Talisman for legal reasons

Furthermore to security, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.

How to adjust the headlights of a Renault Talisman?

We will now proceed to the part that concerns you the most in this post, how to adjust the headlights of his Renault Talisman? This setting may appear a bit complex, but by simply following the recommendations you should be able to complete it without too much problem.

Preparations to adjust the headlights of a Renault Talisman

To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to set up:

  • Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Verify your tire pressure attentively.
  • Verify that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unneeded weight from the car, just one person should be in the driver’s seat.

The headlight adjustment of his Renault Talisman

Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:

  • Open your hood, identify the screws for horizontal and vertical control of the headlights of your Renault Talisman (they are usually marked, and those on top must modify the verticality and the one on the side handles the horizontality of the adjustment).
  • Use a cloth or something else to hide the projector on which you are not making the correction.
  • Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
  • .

  • With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once finished, verify that the headlights setting of your Renault Talisman is coherent, do not think twice to verify it after you have driven it, sometimes it may move.

.
If you want to adjust the fog lights on your Renault Talisman, please read our content page on this subject matter.

Whenever you have any further questions about the Renault Talisman, do not hesitate to consult our Renault Talisman category.