Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these circumstances, there’s only one component of your car to take responsibility – your headlights, also known as high beams. Nevertheless this adjustment might seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this elementary manipulation, and in this post, we are going to see how to adjust the headlights of your Renault Scenic 2? To get this done, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Renault Scenic 2.
Why adjust the headlights of your Renault Scenic 2?
So let’s start our article with the interest of adjusting the headlights of your Renault Scenic 2. For most people, our headlights are adjusted good enough, and they seem to light up enough during the night. Unfortunately this is not always the circumstance and checking this setting, either because the headlights on your Renault Scenic 2 are not bright enough, or because you have the sensation that they are too weak is a great idea .
Adjusting the high beams of your Renault Scenic 2 for safety
To begin with, the headlight adjustment of a Renault Scenic 2 must be made for a very easy security motive. Regardless it’s for you, or for the other users you come across during your night trips. Obviously, if you don’t see enough, the risk is to miss an obstacle on your way, or to anticipate a curve badly. On the other hand, if your headlights are too strong, regardless if you are supposed to switch to low beam lights when you pass a car, the time needed to make this change will generally expose the driver in front of you to the headlight beam of your Renault Scenic 2 . It is therefore important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Renault Scenic 2 for legal reasons
Furthermore to security, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Renault Scenic 2?
We will now move on to the section that interests you the most in this post, how to adjust the headlights of his Renault Scenic 2? This setting might seem a bit difficult, but by following the guidance you should be able to do it without too much concern.
Preparations to adjust the headlights of a Renault Scenic 2
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to executed:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure attentively.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unneeded weight from the automobile, just one person should be in the driver’s seat.
.
The headlight adjustment of his Renault Scenic 2
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your hood, identify the screws for horizontal and vertical adjustment of the headlights of your Renault Scenic 2 (they are in general designated, and those on top must adjust the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Renault Scenic 2 is logical, do not think twice to check it after you have driven it, in some cases it may move.
.
.
If you want to adjust the fog lights on your Renault Scenic 2, please browse our article on this subject matter.
If you wish more guides on the Renault Scenic 2, go to our Renault Scenic 2 category.
