Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these cases, there’s only one component of your vehicle at fault – your headlights, as well known as high beams. Although this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this elementary manipulation, and in this post, we are going to discover how to adjust the headlights of your Renault Megane 4? To achieve this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Renault Megane 4.
Why adjust the headlights of your Renault Megane 4?
So let’s start our content with the benefit of adjusting the headlights of your Renault Megane 4. For many people, our headlights are adjusted good enough, and they appear to light up enough after dark. Sadly this is not always the circumstance and looking at this setting, either because the headlights on your Renault Megane 4 are not bright enough, or because you have the impression that they are too weak is a great idea .
Adjusting the high beams of your Renault Megane 4 for safety
First of all, the headlight adjustment of a Renault Megane 4 must be conducted for a basic security motive. Whether it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to miss an obstacle on your way, or to anticipate a curve badly. However, if your headlights are too powerful, regardless if you are supposed to switch to low beam lights when you pass a car, the time needed to make this change will generally expose the driver in front of you to the headlight beam of your Renault Megane 4 . It is consequently essential for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Renault Megane 4 for legal reasons
In addition to security, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Renault Megane 4?
We will now go forward to the section that interests you the most in this post, how to adjust the headlights of his Renault Megane 4? This setting may seem a bit complicated, but by following the recommendations you should have the ability to do it without too much issue.
Preparations to adjust the headlights of a Renault Megane 4
First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure attentively.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the vehicle, just one person should be in the driver’s seat.
.
The headlight adjustment of his Renault Megane 4
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the headlights of your Renault Megane 4 (they are generally designated, and those on top must modify the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your Renault Megane 4 is logical, do not hesitate to check it after you have driven it, occasionally it may move.
.
.
If you want to adjust the fog lights on your Renault Megane 4, please go through our content on this subject.
To get more tips on the Renault Megane 4, take a look at the Renault Megane 4 category.
