Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these circumstances, there’s only one part of your car to blame – your headlights, as well often known as high beams. Nevertheless this adjustment may appear easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this elementary manipulation, and in this post, we are going to find out how to adjust the headlights of your Renault Maxity? To do this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Renault Maxity.
Why adjust the headlights of your Renault Maxity?
So let’s begin our article with the interest of adjusting the headlights of your Renault Maxity. For most of us, our headlights are adjusted well enough, and they seem to light up enough at nighttime. Regrettably this is not constantly the circumstance and examining this setting, either because the headlights on your Renault Maxity are not bright enough, or because you have the sensation that they are too weak is a good idea .
Adjusting the high beams of your Renault Maxity for safety
To begin with, the headlight adjustment of a Renault Maxity must be conducted for a simple security reason. Whether it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to ignore an obstacle on the road, or to predict a curve badly. Alternatively, if your headlights are too strong, regardless if you are meant to switch to low beam lights when you cross a car, the time needed to make this change will most of the time expose the driver in front of you to the headlight beam of your Renault Maxity . It is therefore important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Renault Maxity for legal reasons
In addition to security, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Renault Maxity?
We will now go forward to the part that concerns you the most in this post, how to adjust the headlights of his Renault Maxity? This setting may appear a bit complex, but by following the instructions you should be able to accomplish it without too much concern.
Preparations to adjust the headlights of a Renault Maxity
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to executed:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure carefully.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unneeded weight from the car, just one person should be in the driver’s seat.
.
The headlight adjustment of his Renault Maxity
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your hood, locate the screws for horizontal and vertical control of the headlights of your Renault Maxity (they are generally marked, and those on top must adjust the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your Renault Maxity is coherent, do not hesitate to check it after you have driven it, often it may move.
.
.
If you want to adjust the fog lights on your Renault Maxity, please read our article on this subject matter.
To discover more tips on the Renault Maxity, take a look at the Renault Maxity category.
