Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these situations, there’s only one component of your car to take responsibility – your headlights, as well known as high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this basic manipulation, and in this article, we are going to see how to adjust the headlights of your Renault Master 3? To do this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Renault Master 3.

adjust-headlights-renault-master-3

Why adjust the headlights of your Renault Master 3?

So let’s start our content page with the interest of adjusting the headlights of your Renault Master 3. For many people, our headlights are adjusted good enough, and they seem to light up enough at nighttime. Sadly this is not constantly the case and examining this setting, either because the headlights on your Renault Master 3 are not bright enough, or because you have the sensation that they are too weak is a wise decision .

Adjusting the high beams of your Renault Master 3 for safety

First of all, the headlight adjustment of a Renault Master 3 must be finished for a simple security motive. Regardless it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to ignore an obstacle driving, or to anticipate a curve badly. However, if your headlights are too strong, regardless if you are expected to switch to low beam lights when you cross a vehicle, the time needed to make this switch will most of the time expose the driver in front of you to the headlight beam of your Renault Master 3 . It is consequently important for others as well as for you to have an optimal adjustment of your headlights.

Adjusting the headlights of a Renault Master 3 for legal reasons

Furthermore to security, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.

How to adjust the headlights of a Renault Master 3?

We will now proceed to the section that interests you the most in this article, how to adjust the headlights of his Renault Master 3? This adjustment may appear a bit difficult, but by following the guidance you should have the ability to do it without too much concern.

Preparations to adjust the headlights of a Renault Master 3

First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to executed:

  • Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Verify your tire pressure attentively.
  • Verify that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Take out all unnecessary weight from the vehicle, just one person should be in the driver’s seat.

The headlight adjustment of his Renault Master 3

Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:

  • Open your bonnet, locate the screws for horizontal and vertical modification of the headlights of your Renault Master 3 (they are in most cases marked, and those on top must modify the verticality and the one on the side controls the horizontality of the adjustment).
  • Use a cloth or different things to hide the projector on which you are not making the adjustment.
  • Using the screws to make the horizontal adjustment, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
  • .

  • With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
  • Once finished, verify that the headlights setting of your Renault Master 3 is coherent, do not think twice to verify it after you have driven it, in some cases it may move.

.
If you want to adjust the fog lights on your Renault Master 3, please browse our content page on this subject matter.

To find more tips on the Renault Master 3, take a look at the Renault Master 3 category.