If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these circumstances, there’s only one component of your car guilty – your headlights, also called high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this elementary manipulation, and in this article, we are going to see how to adjust the headlights of your Renault Master 2? To get this done, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Renault Master 2.
Why adjust the headlights of your Renault Master 2?
So let’s start our content page with the benefit of adjusting the headlights of your Renault Master 2. For most people, our headlights are adjusted well enough, and they seem to light up enough during the night. Regrettably this is not always the circumstance and looking at this setting, either because the headlights on your Renault Master 2 are not bright enough, or because you have the sensation that they are too weak is a wise decision .
Adjusting the high beams of your Renault Master 2 for safety
To begin with, the headlight adjustment of a Renault Master 2 must be finished for a very easy safety reason. Regardless it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to fail to see an obstacle on the road, or to predict a curve badly. Alternatively, if your headlights are too powerful, regardless if you are expected to switch to low beam lights when you pass a car, the time required to make this change will generally expose the driver in front of you to the headlight beam of your Renault Master 2 . It is therefore important for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Renault Master 2 for legal reasons
Furthermore to safety, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Renault Master 2?
We will now move on to the part that concerns you the most in this article, how to adjust the headlights of his Renault Master 2? This adjustment may appear a bit difficult, but by simply following the guidelines you should have the ability to perform it without too much concern.
Preparations to adjust the headlights of a Renault Master 2
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to set up:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure carefully.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the automobile, only one person should be in the driver’s seat.
.
The headlight adjustment of his Renault Master 2
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical modification of the headlights of your Renault Master 2 (they are in general marked, and those on top must modify the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Renault Master 2 is coherent, do not think twice to check it after you have driven it, often it may move.
.
.
If you want to adjust the fog lights on your Renault Master 2, please go through our content page on this subject.
To get more tips on the Renault Master 2, take a look at the Renault Master 2 category.
