Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these scenarios, there’s only one component of your car to take responsibility – your headlights, as well called high beams. Nevertheless this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this basic manipulation, and in this post, we are going to see how to adjust the headlights of your Renault Laguna 2? To achieve this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Renault Laguna 2.
Why adjust the headlights of your Renault Laguna 2?
So let’s begin our article with the interest of adjusting the headlights of your Renault Laguna 2. For many people, our headlights are adjusted well enough, and they seem to light up enough after dark. Regrettably this is not always the circumstance and examining this setting, either because the headlights on your Renault Laguna 2 are not bright enough, or because you have the sensation that they are too weak is a good idea .
Adjusting the high beams of your Renault Laguna 2 for safety
To begin with, the headlight adjustment of a Renault Laguna 2 must be conducted for a very easy security reason. Whether it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to miss out an obstacle while traveling, or to anticipate a curve badly. Alternatively, if your headlights are too strong, even if you are expected to switch to low beam lights when you pass a vehicle, the time required to make this change will most of the time expose the driver in front of you to the headlight beam of your Renault Laguna 2 . It is therefore essential for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Renault Laguna 2 for legal reasons
Furthermore to security, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Renault Laguna 2?
We will now proceed to the part that concerns you the most in this post, how to adjust the headlights of his Renault Laguna 2? This adjustment may appear a bit difficult, but by simply following the recommendations you should be able to perform it without too much problem.
Preparations to adjust the headlights of a Renault Laguna 2
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to set up:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all needless weight from the automobile, only one person should be in the driver’s seat.
.
The headlight adjustment of his Renault Laguna 2
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your bonnet, find the screws for horizontal and vertical modification of the headlights of your Renault Laguna 2 (they are in general marked, and those on top must modify the verticality and the one on the side adjusts the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Renault Laguna 2 is logical, do not think twice to check it after you have driven it, occasionally it may move.
.
.
If you want to adjust the fog lights on your Renault Laguna 2, please go through our article on this subject.
If you need more guides on the Renault Laguna 2, go to our Renault Laguna 2 category.
