Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these situations, there’s only one part of your vehicle at fault – your headlights, as well called high beams. Nevertheless this adjustment might seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this elementary manipulation, and in this post, we are going to discover how to adjust the headlights of your Renault Kangoo? To achieve this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Renault Kangoo.

adjust-headlights-renault-kangoo

Why adjust the headlights of your Renault Kangoo?

So let’s start our article with the benefit of adjusting the headlights of your Renault Kangoo. For most of us, our headlights are adjusted well enough, and they appear to light up enough at night. Sadly this is not always the circumstance and checking this setting, either because the headlights on your Renault Kangoo are not bright enough, or because you have the sensation that they are too weak is a wise decision .

Adjusting the high beams of your Renault Kangoo for safety

First of all, the headlight adjustment of a Renault Kangoo must be conducted for a simple safety motive. Whether it’s for you, or for the other users you come across during your night trips. Obviously, if you don’t see enough, the risk is to ignore an obstacle on your way, or to anticipate a curve badly. On the other hand, if your headlights are too powerful, regardless if you are meant to switch to low beam lights when you pass a vehicle, the time needed to make this change will most of the time expose the driver in front of you to the headlight beam of your Renault Kangoo . It is therefore necessary for others as well as for you to have an optimal adjustment of your headlights.

Adjusting the headlights of a Renault Kangoo for legal reasons

Furthermore to safety, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.

How to adjust the headlights of a Renault Kangoo?

We will now go forward to the part that concerns you the most in this post, how to adjust the headlights of his Renault Kangoo? This setting might seem a bit complex, but by following the guidance you should be able to complete it without too much issue.

Preparations to adjust the headlights of a Renault Kangoo

First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to set up:

  • Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Check your tire pressure carefully.
  • Check that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unneeded weight from the automobile, only one person should be in the driver’s seat.

The headlight adjustment of his Renault Kangoo

Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:

  • Open your bonnet, find the screws for horizontal and vertical adjustment of the headlights of your Renault Kangoo (they are generally designated, and those on top must adjust the verticality and the one on the side handles the horizontality of the adjustment).
  • Use a cloth or different things to hide the projector on which you are not making the modification.
  • Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
  • .

  • With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
  • Once finished, verify that the headlights setting of your Renault Kangoo is logical, do not hesitate to verify it after you have driven it, sometimes it may move.

.
If you want to adjust the fog lights on your Renault Kangoo, please go through our article on this subject matter.

If you want more guides on the Renault Kangoo, go to our Renault Kangoo category.