Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these situations, there’s only one part of your vehicle guilty – your headlights, as well known as high beams. Nevertheless this adjustment might seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this simple manipulation, and in this article, we are going to discover how to adjust the headlights of your Renault Captur? To do this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Renault Captur.

adjust-headlights-renault-captur

Why adjust the headlights of your Renault Captur?

So let’s start our content with the interest of adjusting the headlights of your Renault Captur. For many of us, our headlights are adjusted sufficiently, and they seem to light up enough after dark. Regrettably this is not always the case and examining this setting, either because the headlights on your Renault Captur are not bright enough, or because you have the sensation that they are too weak is a great idea .

Adjusting the high beams of your Renault Captur for safety

First of all, the headlight adjustment of a Renault Captur must be made for a very easy security motive. Whether it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to ignore an obstacle on your way, or to predict a curve badly. On the other hand, if your headlights are too powerful, even if you are supposed to switch to low beam lights when you cross a car, the time needed to make this change will generally expose the driver in front of you to the headlight beam of your Renault Captur . It is therefore essential for others as well as for you to have an optimal adjustment of your headlights.

Adjusting the headlights of a Renault Captur for legal reasons

In addition to security, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.

How to adjust the headlights of a Renault Captur?

We will now proceed to the part that interests you the most in this article, how to adjust the headlights of his Renault Captur? This adjustment might seem a bit complex, but by following the instructions you should be able to accomplish it without too much trouble.

Preparations to adjust the headlights of a Renault Captur

First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to set up:

  • Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Check your tire pressure attentively.
  • Check that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Take out all unnecessary weight from the vehicle, just one person should be in the driver’s seat.

The headlight adjustment of his Renault Captur

Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:

  • Open your bonnet, find the screws for horizontal and vertical control of the headlights of your Renault Captur (they are in most cases designated, and those on top must adjust the verticality and the one on the side controls the horizontality of the adjustment).
  • Use a cloth or different things to hide the projector on which you are not making the correction.
  • Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
  • Once finished, check that the headlights setting of your Renault Captur is coherent, do not hesitate to check it after you have driven it, in some cases it may move.

.
If you want to adjust the fog lights on your Renault Captur, please read our content on this subject.

If you need more guides on the Renault Captur, go to our Renault Captur category.