Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these circumstances, there’s only one component of your vehicle responsible – your headlights, as well named high beams. Although this adjustment may seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this elementary manipulation, and in this post, we are going to see how to adjust the headlights of your Peugeot Traveller? To achieve this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Peugeot Traveller.

adjust-headlights-peugeot-traveller

Why adjust the headlights of your Peugeot Traveller?

So let’s start our content page with the benefit of adjusting the headlights of your Peugeot Traveller. For most of us, our headlights are adjusted sufficiently, and they seem to light up enough after dark. Unfortunately this is not always the circumstance and examining this setting, either because the headlights on your Peugeot Traveller are not bright enough, or because you have the sensation that they are too weak is a wise decision .

Adjusting the high beams of your Peugeot Traveller for safety

First of all, the headlight adjustment of a Peugeot Traveller must be made for a simple safety explanation. Whether it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to miss out an obstacle while traveling, or to anticipate a curve badly. However, if your headlights are too strong, regardless if you are supposed to switch to low beam lights when you cross a car, the time needed to make this switch will most of the time expose the driver in front of you to the headlight beam of your Peugeot Traveller . It is consequently essential for others as well as for you to have an ideal adjustment of your headlights.

Adjusting the headlights of a Peugeot Traveller for legal reasons

In addition to safety, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.

How to adjust the headlights of a Peugeot Traveller?

We will now move on to the part that concerns you the most in this post, how to adjust the headlights of his Peugeot Traveller? This adjustment may seem a bit complex, but by following the guidance you should be able to perform it without too much trouble.

Preparations to adjust the headlights of a Peugeot Traveller

First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to executed:

  • Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Check your tire pressure attentively.
  • Check that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Take out all needless weight from the automobile, just one person should be in the driver’s seat.

The headlight adjustment of his Peugeot Traveller

Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:

  • Open your bonnet, locate the screws for horizontal and vertical control of the headlights of your Peugeot Traveller (they are usually designated, and those on top must modify the verticality and the one on the side controls the horizontality of the adjustment).
  • Use a cloth or different things to hide the projector on which you are not making the correction.
  • Using the screws to make the horizontal correction, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
  • .

  • With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once finished, verify that the headlights setting of your Peugeot Traveller is logical, do not think twice to verify it after you have driven it, in some cases it may move.

.
If you want to adjust the fog lights on your Peugeot Traveller, please read our content page on this subject matter.

If you want more tutorials on the Peugeot Traveller, go to our Peugeot Traveller category.