If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these situations, there’s only one component of your vehicle guilty – your headlights, as well known as high beams. Nevertheless this adjustment might seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this simple manipulation, and in this article, we are going to find out how to adjust the headlights of your Peugeot Partner? To get this done, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Peugeot Partner.

adjust-headlights-peugeot-partner

Why adjust the headlights of your Peugeot Partner?

So let’s begin our article with the interest of adjusting the headlights of your Peugeot Partner. For the majority of us, our headlights are adjusted good enough, and they seem to light up enough at night. Unfortunately this is not always the case and examining this setting, either because the headlights on your Peugeot Partner are not bright enough, or because you have the feeling that they are too weak is a good idea .

Adjusting the high beams of your Peugeot Partner for safety

First of all, the headlight adjustment of a Peugeot Partner must be carried out for a basic safety explanation. Whether it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to fail to see an obstacle driving, or to predict a curve badly. However, if your headlights are too powerful, even if you are supposed to switch to low beam lights when you cross a vehicle, the time required to make this switch will most of the time expose the driver in front of you to the headlight beam of your Peugeot Partner . It is therefore necessary for others as well as for you to have an ideal adjustment of your headlights.

Adjusting the headlights of a Peugeot Partner for legal reasons

In addition to safety, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.

How to adjust the headlights of a Peugeot Partner?

We will now go forward to the part that interests you the most in this article, how to adjust the headlights of his Peugeot Partner? This adjustment might seem a bit complex, but by following the instructions you should be able to do it without too much issue.

Preparations to adjust the headlights of a Peugeot Partner

First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to put in place:

  • Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Check your tire pressure attentively.
  • Check that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all needless weight from the automobile, only one person should be in the driver’s seat.

The headlight adjustment of his Peugeot Partner

Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:

  • Open your bonnet, identify the screws for horizontal and vertical modification of the headlights of your Peugeot Partner (they are in most cases designated, and those on top must modify the verticality and the one on the side adjusts the horizontality of the adjustment).
  • Use a cloth or something else to hide the projector on which you are not making the adjustment.
  • Using the screws to make the horizontal adjustment, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
  • .

  • With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once finished, verify that the headlights setting of your Peugeot Partner is logical, do not think twice to verify it after you have driven it, occasionally it may move.

.
If you want to adjust the fog lights on your Peugeot Partner, please read our article on this subject.

To find more tips on the Peugeot Partner, take a look at the Peugeot Partner category.