If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these circumstances, there’s only one part of your vehicle at fault – your headlights, also often known as high beams. Although this adjustment might seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this basic manipulation, and in this post, we are going to discover how to adjust the headlights of your Peugeot Boxer 2? To do this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Peugeot Boxer 2.
Why adjust the headlights of your Peugeot Boxer 2?
So let’s start our content page with the benefit of adjusting the headlights of your Peugeot Boxer 2. For most people, our headlights are adjusted sufficiently, and they seem to light up enough through the night. Regrettably this is not always the case and checking this setting, either because the headlights on your Peugeot Boxer 2 are not bright enough, or because you have the sensation that they are too weak is a great idea .
Adjusting the high beams of your Peugeot Boxer 2 for safety
To begin with, the headlight adjustment of a Peugeot Boxer 2 must be made for a basic security explanation. Whether it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to fail to see an obstacle driving, or to predict a curve badly. Alternatively, if your headlights are too strong, regardless if you are supposed to switch to low beam lights when you cross a car, the time needed to make this change will generally expose the driver in front of you to the headlight beam of your Peugeot Boxer 2 . It is therefore essential for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Peugeot Boxer 2 for legal reasons
In addition to security, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Peugeot Boxer 2?
We will now proceed to the section that interests you the most in this post, how to adjust the headlights of his Peugeot Boxer 2? This adjustment might seem a bit difficult, but by simply following the instructions you should be able to do it without too much issue.
Preparations to adjust the headlights of a Peugeot Boxer 2
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to set up:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the car, only one person should be in the driver’s seat.
.
The headlight adjustment of his Peugeot Boxer 2
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your hood, identify the screws for horizontal and vertical modification of the headlights of your Peugeot Boxer 2 (they are usually marked, and those on top must modify the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your Peugeot Boxer 2 is logical, do not think twice to check it after you have driven it, sometimes it may move.
.
.
If you want to adjust the fog lights on your Peugeot Boxer 2, please browse our content page on this subject.
If you need more tutorials on the Peugeot Boxer 2, go to our Peugeot Boxer 2 category.
