If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these cases, there’s only one part of your vehicle at fault – your headlights, also called high beams. Although this adjustment may seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this simple manipulation, and in this article, we are going to discover how to adjust the headlights of your Peugeot Bipper? To achieve this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Peugeot Bipper.

adjust-headlights-peugeot-bipper

Why adjust the headlights of your Peugeot Bipper?

So let’s start our content page with the interest of adjusting the headlights of your Peugeot Bipper. For most of us, our headlights are adjusted sufficiently, and they appear to light up enough after dark. Sadly this is not constantly the case and examining this setting, either because the headlights on your Peugeot Bipper are not bright enough, or because you have the impression that they are too weak is a great idea .

Adjusting the high beams of your Peugeot Bipper for safety

To begin with, the headlight adjustment of a Peugeot Bipper must be achieved for a basic safety reason. If it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to ignore an obstacle on the road, or to anticipate a curve badly. Alternatively, if your headlights are too strong, even if you are supposed to switch to low beam lights when you cross a car, the time needed to make this change will most of the time expose the driver in front of you to the headlight beam of your Peugeot Bipper . It is consequently necessary for others as well as for you to have an optimal adjustment of your headlights.

Adjusting the headlights of a Peugeot Bipper for legal reasons

Furthermore to safety, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.

How to adjust the headlights of a Peugeot Bipper?

We will now move on to the section that interests you the most in this article, how to adjust the headlights of his Peugeot Bipper? This adjustment may seem a bit complicated, but by following the guidance you should have the ability to complete it without too much concern.

Preparations to adjust the headlights of a Peugeot Bipper

To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to put in place:

  • Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Check your tire pressure cautiously.
  • Check that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Take out all unneeded weight from the car, only one person should be in the driver’s seat.

The headlight adjustment of his Peugeot Bipper

Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:

  • Open your bonnet, identify the screws for horizontal and vertical modification of the headlights of your Peugeot Bipper (they are generally designated, and those on top must adjust the verticality and the one on the side controls the horizontality of the adjustment).
  • Use a cloth or something else to hide the projector on which you are not making the modification.
  • Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
  • .

  • With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once finished, check that the headlights setting of your Peugeot Bipper is logical, do not hesitate to check it after you have driven it, in some cases it may move.

.
If you want to adjust the fog lights on your Peugeot Bipper, please read our content page on this subject.

If you have any additional questions about the Peugeot Bipper, do not hesitate to consult our Peugeot Bipper category.