Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these cases, there’s only one part of your car responsible – your headlights, also known as high beams. Nevertheless this adjustment might seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this elementary manipulation, and in this post, we are going to see how to adjust the headlights of your Peugeot 607? To get this done, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Peugeot 607.
Why adjust the headlights of your Peugeot 607?
So let’s begin our content with the interest of adjusting the headlights of your Peugeot 607. For most people, our headlights are adjusted good enough, and they appear to light up enough at nighttime. Sadly this is not always the circumstance and examining this setting, either because the headlights on your Peugeot 607 are not bright enough, or because you have the impression that they are too weak is a good idea .
Adjusting the high beams of your Peugeot 607 for safety
To begin with, the headlight adjustment of a Peugeot 607 must be achieved for a basic security reason. If it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to miss an obstacle on your way, or to predict a curve badly. However, if your headlights are too powerful, even if you are supposed to switch to low beam lights when you cross a vehicle, the time needed to make this switch will generally expose the driver in front of you to the headlight beam of your Peugeot 607 . It is consequently necessary for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Peugeot 607 for legal reasons
Furthermore to security, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Peugeot 607?
We will now move on to the section that concerns you the most in this post, how to adjust the headlights of his Peugeot 607? This adjustment might seem a bit complicated, but by simply following the guidance you should have the ability to accomplish it without too much trouble.
Preparations to adjust the headlights of a Peugeot 607
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure attentively.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unneeded weight from the vehicle, just one person should be in the driver’s seat.
.
The headlight adjustment of his Peugeot 607
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your bonnet, locate the screws for horizontal and vertical control of the headlights of your Peugeot 607 (they are in most cases designated, and those on top must adjust the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your Peugeot 607 is coherent, do not think twice to check it after you have driven it, in some cases it may move.
.
.
If you want to adjust the fog lights on your Peugeot 607, please go through our content on this subject matter.
Whenever you have any further questions about the Peugeot 607, do not hesitate to consult our Peugeot 607 category.
