Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these scenarios, there’s only one component of your vehicle responsible – your headlights, as well identified as high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this elementary manipulation, and in this post, we are going to see how to adjust the headlights of your Peugeot 5008? To do this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Peugeot 5008.
Why adjust the headlights of your Peugeot 5008?
So let’s start our article with the benefit of adjusting the headlights of your Peugeot 5008. For many people, our headlights are adjusted good enough, and they appear to light up enough after dark. Unfortunately this is not always the case and looking at this setting, either because the headlights on your Peugeot 5008 are not bright enough, or because you have the impression that they are too weak is a great idea .
Adjusting the high beams of your Peugeot 5008 for safety
First of all, the headlight adjustment of a Peugeot 5008 must be finished for a very easy safety reason. If it’s for you, or for the other users you come across during your night trips. Obviously, if you don’t see enough, the risk is to miss an obstacle on the road, or to anticipate a curve badly. On the other hand, if your headlights are too powerful, even if you are expected to switch to low beam lights when you cross a vehicle, the time needed to make this switch will most of the time expose the driver in front of you to the headlight beam of your Peugeot 5008 . It is therefore essential for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Peugeot 5008 for legal reasons
Furthermore to safety, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Peugeot 5008?
We will now move on to the part that interests you the most in this post, how to adjust the headlights of his Peugeot 5008? This setting may appear a bit complex, but by following the guidance you should have the ability to perform it without too much concern.
Preparations to adjust the headlights of a Peugeot 5008
First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to executed:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the car, only one person should be in the driver’s seat.
.
The headlight adjustment of his Peugeot 5008
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your bonnet, identify the screws for horizontal and vertical modification of the headlights of your Peugeot 5008 (they are in most cases marked, and those on top must adjust the verticality and the one on the side manages the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Peugeot 5008 is logical, do not think twice to verify it after you have driven it, in some cases it may move.
.
.
If you want to adjust the fog lights on your Peugeot 5008, please browse our article on this subject.
To find more tips on the Peugeot 5008, take a look at the Peugeot 5008 category.
