If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these circumstances, there’s only one component of your car at fault – your headlights, also known as high beams. Although this adjustment might seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this elementary manipulation, and in this article, we are going to see how to adjust the headlights of your Peugeot 308? To get this done, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Peugeot 308.
Why adjust the headlights of your Peugeot 308?
So let’s begin our content with the benefit of adjusting the headlights of your Peugeot 308. For many people, our headlights are adjusted good enough, and they seem to light up enough during the night. Sadly this is not constantly the case and examining this setting, either because the headlights on your Peugeot 308 are not bright enough, or because you have the impression that they are too weak is a wise decision .
Adjusting the high beams of your Peugeot 308 for safety
First of all, the headlight adjustment of a Peugeot 308 must be conducted for a basic security reason. If it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to ignore an obstacle while traveling, or to anticipate a curve badly. On the other hand, if your headlights are too strong, regardless if you are supposed to switch to low beam lights when you cross a vehicle, the time needed to make this switch will generally expose the driver in front of you to the headlight beam of your Peugeot 308 . It is therefore important for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Peugeot 308 for legal reasons
Furthermore to security, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Peugeot 308?
We will now proceed to the part that interests you the most in this article, how to adjust the headlights of his Peugeot 308? This adjustment might seem a bit complex, but by following the guidance you should have the ability to perform it without too much issue.
Preparations to adjust the headlights of a Peugeot 308
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unnecessary weight from the vehicle, only one person should be in the driver’s seat.
.
The headlight adjustment of his Peugeot 308
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your hood, find the screws for horizontal and vertical control of the headlights of your Peugeot 308 (they are in general marked, and those on top must adjust the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Peugeot 308 is logical, do not think twice to verify it after you have driven it, in some cases it may move.
.
.
If you want to adjust the fog lights on your Peugeot 308, please go through our content on this subject.
To find more tips on the Peugeot 308, take a look at the Peugeot 308 category.
