If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these situations, there’s only one part of your car to blame – your headlights, as well known as high beams. Nevertheless this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this simple manipulation, and in this article, we are going to find out how to adjust the headlights of your Peugeot 306? To do this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Peugeot 306.
Why adjust the headlights of your Peugeot 306?
So let’s start our article with the benefit of adjusting the headlights of your Peugeot 306. For the majority of us, our headlights are adjusted good enough, and they seem to light up enough at night. Unfortunately this is not constantly the circumstance and examining this setting, either because the headlights on your Peugeot 306 are not bright enough, or because you have the feeling that they are too weak is a great idea .
Adjusting the high beams of your Peugeot 306 for safety
To begin with, the headlight adjustment of a Peugeot 306 must be finished for a very easy safety explanation. Regardless it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to miss out an obstacle on your way, or to anticipate a curve badly. On the other hand, if your headlights are too strong, regardless if you are expected to switch to low beam lights when you cross a car, the time needed to make this switch will most of the time expose the driver in front of you to the headlight beam of your Peugeot 306 . It is consequently important for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Peugeot 306 for legal reasons
In addition to safety, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Peugeot 306?
We will now move on to the section that concerns you the most in this article, how to adjust the headlights of his Peugeot 306? This adjustment may seem a bit difficult, but by simply following the guidance you should have the ability to accomplish it without too much issue.
Preparations to adjust the headlights of a Peugeot 306
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure attentively.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unnecessary weight from the vehicle, only one person should be in the driver’s seat.
.
The headlight adjustment of his Peugeot 306
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your hood, locate the screws for horizontal and vertical modification of the headlights of your Peugeot 306 (they are in most cases designated, and those on top must modify the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Peugeot 306 is logical, do not hesitate to check it after you have driven it, oftentimes it may move.
.
.
If you want to adjust the fog lights on your Peugeot 306, please go through our article on this subject matter.
In the event that you have any additional questions about the Peugeot 306, do not hesitate to consult our Peugeot 306 category.
