If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these cases, there’s only one component of your vehicle responsible – your headlights, as well called high beams. Nevertheless this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this basic manipulation, and in this article, we are going to see how to adjust the headlights of your Peugeot 3008? To do this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Peugeot 3008.
Why adjust the headlights of your Peugeot 3008?
So let’s begin our content with the interest of adjusting the headlights of your Peugeot 3008. For the majority of us, our headlights are adjusted well enough, and they seem to light up enough at nighttime. Sadly this is not constantly the case and checking this setting, either because the headlights on your Peugeot 3008 are not bright enough, or because you have the feeling that they are too weak is a great idea .
Adjusting the high beams of your Peugeot 3008 for safety
To begin with, the headlight adjustment of a Peugeot 3008 must be carried out for a very easy safety reason. Whether it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to fail to see an obstacle on the road, or to anticipate a curve badly. Alternatively, if your headlights are too strong, even if you are supposed to switch to low beam lights when you cross a car, the time needed to make this switch will most of the time expose the driver in front of you to the headlight beam of your Peugeot 3008 . It is therefore essential for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Peugeot 3008 for legal reasons
In addition to safety, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Peugeot 3008?
We will now move on to the section that interests you the most in this article, how to adjust the headlights of his Peugeot 3008? This adjustment may appear a bit complex, but by simply following the recommendations you should be able to accomplish it without too much concern.
Preparations to adjust the headlights of a Peugeot 3008
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to executed:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure carefully.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all needless weight from the car, only one person should be in the driver’s seat.
.
The headlight adjustment of his Peugeot 3008
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your bonnet, find the screws for horizontal and vertical modification of the headlights of your Peugeot 3008 (they are in most cases marked, and those on top must adjust the verticality and the one on the side adjusts the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, verify that the headlights setting of your Peugeot 3008 is logical, do not think twice to verify it after you have driven it, often it may move.
.
.
If you want to adjust the fog lights on your Peugeot 3008, please go through our content on this subject matter.
If you need more guides on the Peugeot 3008, go to our Peugeot 3008 category.
