Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these cases, there’s only one part of your car to blame – your headlights, as well often known as high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this simple manipulation, and in this article, we are going to find out how to adjust the headlights of your Peugeot 207? To do this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Peugeot 207.
Why adjust the headlights of your Peugeot 207?
So let’s begin our content page with the benefit of adjusting the headlights of your Peugeot 207. For the majority of us, our headlights are adjusted sufficiently, and they seem to light up enough at night. Regrettably this is not constantly the case and looking at this setting, either because the headlights on your Peugeot 207 are not bright enough, or because you have the sensation that they are too weak is a great idea .
Adjusting the high beams of your Peugeot 207 for safety
First of all, the headlight adjustment of a Peugeot 207 must be carried out for a simple security reason. Regardless it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to ignore an obstacle driving, or to anticipate a curve badly. Alternatively, if your headlights are too powerful, regardless if you are meant to switch to low beam lights when you pass a vehicle, the time needed to make this change will most of the time expose the driver in front of you to the headlight beam of your Peugeot 207 . It is therefore necessary for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Peugeot 207 for legal reasons
In addition to security, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Peugeot 207?
We will now move on to the part that interests you the most in this article, how to adjust the headlights of his Peugeot 207? This setting may appear a bit complex, but by simply following the recommendations you should be able to complete it without too much trouble.
Preparations to adjust the headlights of a Peugeot 207
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to set up:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure attentively.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all needless weight from the car, only one person should be in the driver’s seat.
.
The headlight adjustment of his Peugeot 207
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your hood, identify the screws for horizontal and vertical modification of the headlights of your Peugeot 207 (they are in most cases marked, and those on top must modify the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Peugeot 207 is coherent, do not hesitate to verify it after you have driven it, occasionally it may move.
.
.
If you want to adjust the fog lights on your Peugeot 207, please go through our content page on this subject.
If you need more guides on the Peugeot 207, go to our Peugeot 207 category.
