Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these circumstances, there’s only one component of your vehicle to take responsibility – your headlights, as well named high beams. Nevertheless this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this simple manipulation, and in this post, we are going to see how to adjust the headlights of your Peugeot 206 ? To achieve this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Peugeot 206 .

adjust-headlights-peugeot-206-

Why adjust the headlights of your Peugeot 206 ?

So let’s begin our article with the interest of adjusting the headlights of your Peugeot 206 . For many of us, our headlights are adjusted good enough, and they appear to light up enough through the night. Regrettably this is not constantly the circumstance and checking this setting, either because the headlights on your Peugeot 206 are not bright enough, or because you have the impression that they are too weak is a great idea .

Adjusting the high beams of your Peugeot 206 for safety

First of all, the headlight adjustment of a Peugeot 206 must be conducted for a simple safety reason. Regardless it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to fail to see an obstacle while traveling, or to anticipate a curve badly. However, if your headlights are too strong, even if you are supposed to switch to low beam lights when you pass a car, the time required to make this switch will most of the time expose the driver in front of you to the headlight beam of your Peugeot 206 . It is therefore necessary for others as well as for you to have an ideal adjustment of your headlights.

Adjusting the headlights of a Peugeot 206 for legal reasons

Furthermore to safety, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.

How to adjust the headlights of a Peugeot 206 ?

We will now proceed to the section that concerns you the most in this post, how to adjust the headlights of his Peugeot 206 ? This setting may seem a bit complicated, but by following the instructions you should be able to accomplish it without too much trouble.

Preparations to adjust the headlights of a Peugeot 206

First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to set up:

  • Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Verify your tire pressure carefully.
  • Verify that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unneeded weight from the car, only one person should be in the driver’s seat.

The headlight adjustment of his Peugeot 206

Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:

  • Open your bonnet, identify the screws for horizontal and vertical control of the headlights of your Peugeot 206 (they are in general designated, and those on top must adjust the verticality and the one on the side handles the horizontality of the adjustment).
  • Use a cloth or another thing to hide the projector on which you are not making the modification.
  • Using the screws to make the horizontal modification, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
  • .

  • With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
  • Once finished, check that the headlights setting of your Peugeot 206 is coherent, do not think twice to check it after you have driven it, oftentimes it may move.

.
If you want to adjust the fog lights on your Peugeot 206 , please browse our article on this subject matter.

If you want more guides on the Peugeot 206 , go to our Peugeot 206 category.