Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these cases, there’s only one component of your car to blame – your headlights, also often known as high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this elementary manipulation, and in this post, we are going to find out how to adjust the headlights of your Peugeot 108? To get this done, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Peugeot 108.
Why adjust the headlights of your Peugeot 108?
So let’s start our content with the benefit of adjusting the headlights of your Peugeot 108. For most people, our headlights are adjusted good enough, and they appear to light up enough at night. Regrettably this is not always the case and looking at this setting, either because the headlights on your Peugeot 108 are not bright enough, or because you have the sensation that they are too weak is a great idea .
Adjusting the high beams of your Peugeot 108 for safety
First of all, the headlight adjustment of a Peugeot 108 must be conducted for a basic security reason. Regardless it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to miss out an obstacle while traveling, or to predict a curve badly. Alternatively, if your headlights are too strong, regardless if you are expected to switch to low beam lights when you pass a car, the time required to make this change will generally expose the driver in front of you to the headlight beam of your Peugeot 108 . It is consequently necessary for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Peugeot 108 for legal reasons
In addition to security, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Peugeot 108?
We will now proceed to the part that interests you the most in this post, how to adjust the headlights of his Peugeot 108? This setting may appear a bit complicated, but by following the instructions you should have the ability to do it without too much problem.
Preparations to adjust the headlights of a Peugeot 108
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the vehicle, only one person should be in the driver’s seat.
.
The headlight adjustment of his Peugeot 108
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your hood, locate the screws for horizontal and vertical adjustment of the headlights of your Peugeot 108 (they are usually marked, and those on top must adjust the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, verify that the headlights setting of your Peugeot 108 is logical, do not think twice to verify it after you have driven it, in some cases it may move.
.
.
If you want to adjust the fog lights on your Peugeot 108, please go through our content on this subject.
If you need more guides on the Peugeot 108, go to our Peugeot 108 category.
