If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these scenarios, there’s only one component of your car at fault – your headlights, as well identified as high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this simple manipulation, and in this post, we are going to find out how to adjust the headlights of your Peugeot 106? To get this done, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Peugeot 106.
Why adjust the headlights of your Peugeot 106?
So let’s start our content with the benefit of adjusting the headlights of your Peugeot 106. For most people, our headlights are adjusted well enough, and they seem to light up enough during the night. Sadly this is not constantly the circumstance and looking at this setting, either because the headlights on your Peugeot 106 are not bright enough, or because you have the feeling that they are too weak is a good idea .
Adjusting the high beams of your Peugeot 106 for safety
First of all, the headlight adjustment of a Peugeot 106 must be conducted for a simple safety motive. If it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to miss an obstacle while traveling, or to anticipate a curve badly. On the other hand, if your headlights are too strong, regardless if you are meant to switch to low beam lights when you pass a car, the time required to make this switch will most of the time expose the driver in front of you to the headlight beam of your Peugeot 106 . It is therefore essential for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Peugeot 106 for legal reasons
In addition to safety, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Peugeot 106?
We will now move on to the part that interests you the most in this post, how to adjust the headlights of his Peugeot 106? This adjustment may appear a bit complicated, but by simply following the guidelines you should have the ability to perform it without too much issue.
Preparations to adjust the headlights of a Peugeot 106
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure attentively.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all needless weight from the vehicle, only one person should be in the driver’s seat.
.
The headlight adjustment of his Peugeot 106
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your hood, identify the screws for horizontal and vertical modification of the headlights of your Peugeot 106 (they are in general marked, and those on top must adjust the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your Peugeot 106 is logical, do not hesitate to check it after you have driven it, often it may move.
.
.
If you want to adjust the fog lights on your Peugeot 106, please browse our content on this subject matter.
To discover more tips on the Peugeot 106, take a look at the Peugeot 106 category.
