If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these situations, there’s only one part of your car guilty – your headlights, also often known as high beams. Although this adjustment might seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this simple manipulation, and in this article, we are going to see how to adjust the headlights of your Peugeot 1007? To get this done, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Peugeot 1007.
Why adjust the headlights of your Peugeot 1007?
So let’s begin our content with the interest of adjusting the headlights of your Peugeot 1007. For many of us, our headlights are adjusted well enough, and they seem to light up enough during the night. Unfortunately this is not constantly the case and checking this setting, either because the headlights on your Peugeot 1007 are not bright enough, or because you have the sensation that they are too weak is a good idea .
Adjusting the high beams of your Peugeot 1007 for safety
First of all, the headlight adjustment of a Peugeot 1007 must be made for a basic security explanation. Whether it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to miss out an obstacle while traveling, or to anticipate a curve badly. On the other hand, if your headlights are too powerful, even if you are expected to switch to low beam lights when you cross a vehicle, the time required to make this switch will most of the time expose the driver in front of you to the headlight beam of your Peugeot 1007 . It is consequently necessary for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Peugeot 1007 for legal reasons
Furthermore to security, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Peugeot 1007?
We will now proceed to the section that interests you the most in this article, how to adjust the headlights of his Peugeot 1007? This adjustment might seem a bit complicated, but by following the recommendations you should be able to complete it without too much concern.
Preparations to adjust the headlights of a Peugeot 1007
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to executed:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure attentively.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the automobile, just one person should be in the driver’s seat.
.
The headlight adjustment of his Peugeot 1007
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the headlights of your Peugeot 1007 (they are in most cases designated, and those on top must modify the verticality and the one on the side adjusts the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Peugeot 1007 is logical, do not hesitate to verify it after you have driven it, often it may move.
.
.
If you want to adjust the fog lights on your Peugeot 1007, please go through our content on this subject matter.
In the event that you have any further questions about the Peugeot 1007, do not hesitate to consult our Peugeot 1007 category.
