If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these situations, there’s only one component of your car guilty – your headlights, also known as high beams. Nevertheless this adjustment may seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this elementary manipulation, and in this article, we are going to discover how to adjust the headlights of your Opel Vivaro? To get this done, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Opel Vivaro.

adjust-headlights-opel-vivaro

Why adjust the headlights of your Opel Vivaro?

So let’s start our content page with the benefit of adjusting the headlights of your Opel Vivaro. For the majority of us, our headlights are adjusted sufficiently, and they appear to light up enough at night. Regrettably this is not constantly the circumstance and checking this setting, either because the headlights on your Opel Vivaro are not bright enough, or because you have the sensation that they are too weak is a great idea .

Adjusting the high beams of your Opel Vivaro for safety

First of all, the headlight adjustment of a Opel Vivaro must be done for a basic safety motive. If it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to miss out an obstacle driving, or to anticipate a curve badly. On the other hand, if your headlights are too strong, regardless if you are meant to switch to low beam lights when you cross a car, the time needed to make this change will generally expose the driver in front of you to the headlight beam of your Opel Vivaro . It is therefore essential for others as well as for you to have an ideal adjustment of your headlights.

Adjusting the headlights of a Opel Vivaro for legal reasons

In addition to safety, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.

How to adjust the headlights of a Opel Vivaro?

We will now go forward to the part that interests you the most in this article, how to adjust the headlights of his Opel Vivaro? This setting may seem a bit difficult, but by simply following the recommendations you should be able to do it without too much problem.

Preparations to adjust the headlights of a Opel Vivaro

First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to put in place:

  • Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Check your tire pressure cautiously.
  • Check that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Take out all needless weight from the car, just one person should be in the driver’s seat.

The headlight adjustment of his Opel Vivaro

Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:

  • Open your bonnet, identify the screws for horizontal and vertical modification of the headlights of your Opel Vivaro (they are usually marked, and those on top must adjust the verticality and the one on the side adjusts the horizontality of the adjustment).
  • Use a cloth or another thing to hide the projector on which you are not making the correction.
  • Using the screws to make the horizontal correction, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once finished, check that the headlights setting of your Opel Vivaro is logical, do not think twice to check it after you have driven it, in some cases it may move.

.
If you want to adjust the fog lights on your Opel Vivaro, please read our content page on this subject.

If you want more tutorials on the Opel Vivaro, go to our Opel Vivaro category.