Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these cases, there’s only one component of your vehicle responsible – your headlights, also identified as high beams. Nevertheless this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this elementary manipulation, and in this post, we are going to discover how to adjust the headlights of your Opel Crossland? To do this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Opel Crossland.
Why adjust the headlights of your Opel Crossland?
So let’s begin our content with the interest of adjusting the headlights of your Opel Crossland. For many of us, our headlights are adjusted sufficiently, and they appear to light up enough after dark. Sadly this is not constantly the case and examining this setting, either because the headlights on your Opel Crossland are not bright enough, or because you have the sensation that they are too weak is a wise decision .
Adjusting the high beams of your Opel Crossland for safety
First of all, the headlight adjustment of a Opel Crossland must be carried out for a very easy safety reason. If it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to ignore an obstacle on your way, or to anticipate a curve badly. However, if your headlights are too powerful, regardless if you are supposed to switch to low beam lights when you cross a car, the time needed to make this change will generally expose the driver in front of you to the headlight beam of your Opel Crossland . It is consequently important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Opel Crossland for legal reasons
Furthermore to safety, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Opel Crossland?
We will now proceed to the part that concerns you the most in this post, how to adjust the headlights of his Opel Crossland? This setting may appear a bit difficult, but by following the recommendations you should be able to complete it without too much trouble.
Preparations to adjust the headlights of a Opel Crossland
First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unneeded weight from the car, just one person should be in the driver’s seat.
.
The headlight adjustment of his Opel Crossland
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the headlights of your Opel Crossland (they are in general marked, and those on top must adjust the verticality and the one on the side adjusts the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Opel Crossland is logical, do not hesitate to check it after you have driven it, oftentimes it may move.
.
.
If you want to adjust the fog lights on your Opel Crossland, please browse our content on this subject matter.
In the event that you have any further questions about the Opel Crossland, do not hesitate to consult our Opel Crossland category.
