If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these scenarios, there’s only one component of your vehicle at fault – your headlights, also called high beams. Nevertheless this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this elementary manipulation, and in this article, we are going to discover how to adjust the headlights of your Opel Antara? To achieve this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Opel Antara.
Why adjust the headlights of your Opel Antara?
So let’s begin our content page with the benefit of adjusting the headlights of your Opel Antara. For most of us, our headlights are adjusted well enough, and they appear to light up enough at night. Regrettably this is not constantly the circumstance and checking this setting, either because the headlights on your Opel Antara are not bright enough, or because you have the impression that they are too weak is a wise decision .
Adjusting the high beams of your Opel Antara for safety
First of all, the headlight adjustment of a Opel Antara must be made for a very easy security motive. If it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to miss out an obstacle driving, or to anticipate a curve badly. On the other hand, if your headlights are too powerful, regardless if you are expected to switch to low beam lights when you pass a car, the time required to make this switch will generally expose the driver in front of you to the headlight beam of your Opel Antara . It is consequently important for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Opel Antara for legal reasons
Furthermore to security, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Opel Antara?
We will now proceed to the section that interests you the most in this article, how to adjust the headlights of his Opel Antara? This setting may appear a bit complicated, but by simply following the guidelines you should have the ability to complete it without too much issue.
Preparations to adjust the headlights of a Opel Antara
First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to executed:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure carefully.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the vehicle, just one person should be in the driver’s seat.
.
The headlight adjustment of his Opel Antara
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical control of the headlights of your Opel Antara (they are usually designated, and those on top must modify the verticality and the one on the side adjusts the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your Opel Antara is coherent, do not hesitate to check it after you have driven it, sometimes it may move.
.
.
If you want to adjust the fog lights on your Opel Antara, please read our content page on this subject.
If you want more tutorials on the Opel Antara, go to our Opel Antara category.
