Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these situations, there’s only one part of your car at fault – your headlights, also called high beams. Although this adjustment might seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this basic manipulation, and in this post, we are going to see how to adjust the headlights of your Opel Adam? To do this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Opel Adam.

adjust-headlights-opel-adam

Why adjust the headlights of your Opel Adam?

So let’s start our content page with the interest of adjusting the headlights of your Opel Adam. For many people, our headlights are adjusted sufficiently, and they seem to light up enough after dark. Regrettably this is not constantly the case and looking at this setting, either because the headlights on your Opel Adam are not bright enough, or because you have the impression that they are too weak is a good idea .

Adjusting the high beams of your Opel Adam for safety

To begin with, the headlight adjustment of a Opel Adam must be finished for a basic security explanation. If it’s for you, or for the other users you come across during your night trips. Obviously, if you don’t see enough, the risk is to miss an obstacle while traveling, or to anticipate a curve badly. On the other hand, if your headlights are too strong, even if you are meant to switch to low beam lights when you cross a car, the time needed to make this switch will generally expose the driver in front of you to the headlight beam of your Opel Adam . It is therefore essential for others as well as for you to have an ideal adjustment of your headlights.

Adjusting the headlights of a Opel Adam for legal reasons

Furthermore to security, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.

How to adjust the headlights of a Opel Adam?

We will now move on to the section that concerns you the most in this post, how to adjust the headlights of his Opel Adam? This setting might seem a bit complicated, but by simply following the guidance you should have the ability to complete it without too much issue.

Preparations to adjust the headlights of a Opel Adam

To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to put in place:

  • Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Check your tire pressure carefully.
  • Check that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Take out all needless weight from the vehicle, just one person should be in the driver’s seat.

The headlight adjustment of his Opel Adam

Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:

  • Open your hood, locate the screws for horizontal and vertical adjustment of the headlights of your Opel Adam (they are generally marked, and those on top must modify the verticality and the one on the side controls the horizontality of the adjustment).
  • Use a cloth or something else to hide the projector on which you are not making the correction.
  • Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
  • .

  • With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once finished, check that the headlights setting of your Opel Adam is coherent, do not think twice to check it after you have driven it, oftentimes it may move.

.
If you want to adjust the fog lights on your Opel Adam, please go through our content page on this subject matter.

To find more tips on the Opel Adam, take a look at the Opel Adam category.