If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these circumstances, there’s only one component of your vehicle to take responsibility – your headlights, as well named high beams. Nevertheless this adjustment might seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this simple manipulation, and in this post, we are going to discover how to adjust the headlights of your Nissan X-trail? To achieve this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Nissan X-trail.
Why adjust the headlights of your Nissan X-trail?
So let’s start our content page with the benefit of adjusting the headlights of your Nissan X-trail. For many people, our headlights are adjusted good enough, and they seem to light up enough after dark. Sadly this is not always the circumstance and examining this setting, either because the headlights on your Nissan X-trail are not bright enough, or because you have the sensation that they are too weak is a great idea .
Adjusting the high beams of your Nissan X-trail for safety
First of all, the headlight adjustment of a Nissan X-trail must be finished for a simple safety explanation. If it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to miss an obstacle while traveling, or to anticipate a curve badly. On the other hand, if your headlights are too strong, even if you are supposed to switch to low beam lights when you pass a car, the time required to make this switch will most of the time expose the driver in front of you to the headlight beam of your Nissan X-trail . It is therefore necessary for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Nissan X-trail for legal reasons
Furthermore to safety, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Nissan X-trail?
We will now go forward to the part that interests you the most in this post, how to adjust the headlights of his Nissan X-trail? This adjustment might seem a bit complicated, but by simply following the recommendations you should have the ability to accomplish it without too much problem.
Preparations to adjust the headlights of a Nissan X-trail
First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure carefully.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the vehicle, only one person should be in the driver’s seat.
.
The headlight adjustment of his Nissan X-trail
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the headlights of your Nissan X-trail (they are in general marked, and those on top must modify the verticality and the one on the side manages the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your Nissan X-trail is coherent, do not think twice to check it after you have driven it, occasionally it may move.
.
.
If you want to adjust the fog lights on your Nissan X-trail, please read our content page on this subject.
If you need more guides on the Nissan X-trail, go to our Nissan X-trail category.
