Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these situations, there’s only one component of your car to take responsibility – your headlights, also identified as high beams. Nevertheless this adjustment might seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this basic manipulation, and in this article, we are going to find out how to adjust the headlights of your Nissan Versa? To do this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Nissan Versa.
Why adjust the headlights of your Nissan Versa?
So let’s start our content with the interest of adjusting the headlights of your Nissan Versa. For the majority of us, our headlights are adjusted sufficiently, and they appear to light up enough at nighttime. Unfortunately this is not always the case and checking this setting, either because the headlights on your Nissan Versa are not bright enough, or because you have the impression that they are too weak is a great idea .
Adjusting the high beams of your Nissan Versa for safety
First of all, the headlight adjustment of a Nissan Versa must be done for a simple safety explanation. Whether it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to miss out an obstacle on the road, or to anticipate a curve badly. On the other hand, if your headlights are too strong, regardless if you are expected to switch to low beam lights when you pass a car, the time needed to make this change will generally expose the driver in front of you to the headlight beam of your Nissan Versa . It is therefore necessary for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Nissan Versa for legal reasons
In addition to safety, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Nissan Versa?
We will now proceed to the section that concerns you the most in this article, how to adjust the headlights of his Nissan Versa? This setting might seem a bit complex, but by following the instructions you should have the ability to perform it without too much trouble.
Preparations to adjust the headlights of a Nissan Versa
First of all, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to executed:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unnecessary weight from the vehicle, just one person should be in the driver’s seat.
.
The headlight adjustment of his Nissan Versa
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your hood, locate the screws for horizontal and vertical control of the headlights of your Nissan Versa (they are in most cases marked, and those on top must adjust the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Nissan Versa is coherent, do not think twice to verify it after you have driven it, often it may move.
.
.
If you want to adjust the fog lights on your Nissan Versa, please go through our content on this subject matter.
To find more tips on the Nissan Versa, take a look at the Nissan Versa category.
