Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these scenarios, there’s only one component of your car responsible – your headlights, also known as high beams. Nevertheless this adjustment might seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this basic manipulation, and in this article, we are going to discover how to adjust the headlights of your Nissan Rogue? To get this done, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Nissan Rogue.
Why adjust the headlights of your Nissan Rogue?
So let’s begin our article with the interest of adjusting the headlights of your Nissan Rogue. For the majority of us, our headlights are adjusted well enough, and they seem to light up enough during the night. Regrettably this is not always the case and checking this setting, either because the headlights on your Nissan Rogue are not bright enough, or because you have the sensation that they are too weak is a good idea .
Adjusting the high beams of your Nissan Rogue for safety
To begin with, the headlight adjustment of a Nissan Rogue must be done for a simple safety motive. Whether it’s for you, or for the other users you come across during your night trips. Obviously, if you don’t see enough, the risk is to miss out an obstacle on the road, or to predict a curve badly. However, if your headlights are too strong, even if you are expected to switch to low beam lights when you cross a vehicle, the time needed to make this switch will most of the time expose the driver in front of you to the headlight beam of your Nissan Rogue . It is consequently necessary for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Nissan Rogue for legal reasons
In addition to safety, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Nissan Rogue?
We will now proceed to the section that interests you the most in this article, how to adjust the headlights of his Nissan Rogue? This setting might seem a bit complicated, but by following the guidance you should be able to do it without too much problem.
Preparations to adjust the headlights of a Nissan Rogue
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to executed:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
.
- Try doing that with half a full tank.
- Take out all unnecessary weight from the car, just one person should be in the driver’s seat.
The headlight adjustment of his Nissan Rogue
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your hood, identify the screws for horizontal and vertical adjustment of the headlights of your Nissan Rogue (they are generally marked, and those on top must adjust the verticality and the one on the side manages the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
.
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Nissan Rogue is coherent, do not think twice to verify it after you have driven it, sometimes it may move.
.
If you want to adjust the fog lights on your Nissan Rogue, please go through our article on this subject matter.
If perhaps you have any additional questions about the Nissan Rogue, do not hesitate to consult our Nissan Rogue category.
