Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these situations, there’s only one part of your vehicle at fault – your headlights, as well known as high beams. Nevertheless this adjustment might seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this basic manipulation, and in this article, we are going to find out how to adjust the headlights of your Nissan Qashqai? To achieve this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Nissan Qashqai.
Why adjust the headlights of your Nissan Qashqai?
So let’s start our content with the benefit of adjusting the headlights of your Nissan Qashqai. For many people, our headlights are adjusted sufficiently, and they seem to light up enough through the night. Unfortunately this is not constantly the circumstance and looking at this setting, either because the headlights on your Nissan Qashqai are not bright enough, or because you have the impression that they are too weak is a good idea .
Adjusting the high beams of your Nissan Qashqai for safety
First of all, the headlight adjustment of a Nissan Qashqai must be finished for a basic safety motive. Regardless it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to ignore an obstacle driving, or to predict a curve badly. However, if your headlights are too powerful, even if you are expected to switch to low beam lights when you pass a car, the time needed to make this change will most of the time expose the driver in front of you to the headlight beam of your Nissan Qashqai . It is consequently essential for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Nissan Qashqai for legal reasons
In addition to safety, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Nissan Qashqai?
We will now proceed to the section that concerns you the most in this article, how to adjust the headlights of his Nissan Qashqai? This adjustment might seem a bit complex, but by following the instructions you should be able to accomplish it without too much problem.
Preparations to adjust the headlights of a Nissan Qashqai
First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to executed:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure carefully.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unnecessary weight from the automobile, only one person should be in the driver’s seat.
.
The headlight adjustment of his Nissan Qashqai
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your bonnet, find the screws for horizontal and vertical modification of the headlights of your Nissan Qashqai (they are usually designated, and those on top must modify the verticality and the one on the side manages the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Nissan Qashqai is logical, do not hesitate to verify it after you have driven it, occasionally it may move.
.
.
If you want to adjust the fog lights on your Nissan Qashqai, please go through our content on this subject.
If you have any further questions about the Nissan Qashqai, do not hesitate to consult our Nissan Qashqai category.
