Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these circumstances, there’s only one component of your car responsible – your headlights, also called high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this elementary manipulation, and in this article, we are going to discover how to adjust the headlights of your Nissan Patrol 3? To do this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Nissan Patrol 3.
Why adjust the headlights of your Nissan Patrol 3?
So let’s start our content with the interest of adjusting the headlights of your Nissan Patrol 3. For most of us, our headlights are adjusted well enough, and they appear to light up enough during the night. Regrettably this is not constantly the case and examining this setting, either because the headlights on your Nissan Patrol 3 are not bright enough, or because you have the impression that they are too weak is a wise decision .
Adjusting the high beams of your Nissan Patrol 3 for safety
To begin with, the headlight adjustment of a Nissan Patrol 3 must be carried out for a basic safety motive. Regardless it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to miss out an obstacle while traveling, or to predict a curve badly. On the other hand, if your headlights are too strong, even if you are meant to switch to low beam lights when you cross a car, the time needed to make this switch will generally expose the driver in front of you to the headlight beam of your Nissan Patrol 3 . It is therefore important for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Nissan Patrol 3 for legal reasons
In addition to safety, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Nissan Patrol 3?
We will now proceed to the part that interests you the most in this article, how to adjust the headlights of his Nissan Patrol 3? This setting may appear a bit difficult, but by following the recommendations you should be able to accomplish it without too much trouble.
Preparations to adjust the headlights of a Nissan Patrol 3
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all needless weight from the automobile, only one person should be in the driver’s seat.
.
The headlight adjustment of his Nissan Patrol 3
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your hood, locate the screws for horizontal and vertical adjustment of the headlights of your Nissan Patrol 3 (they are generally designated, and those on top must adjust the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Nissan Patrol 3 is logical, do not think twice to verify it after you have driven it, in some cases it may move.
.
.
If you want to adjust the fog lights on your Nissan Patrol 3, please read our content on this subject matter.
Whenever you have any additional questions about the Nissan Patrol 3, do not hesitate to consult our Nissan Patrol 3 category.
