Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these situations, there’s only one part of your vehicle to blame – your headlights, as well known as high beams. Nevertheless this adjustment may appear easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this elementary manipulation, and in this article, we are going to discover how to adjust the headlights of your Nissan NV200? To achieve this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Nissan NV200.
Why adjust the headlights of your Nissan NV200?
So let’s start our content with the benefit of adjusting the headlights of your Nissan NV200. For most people, our headlights are adjusted good enough, and they appear to light up enough through the night. Unfortunately this is not always the case and looking at this setting, either because the headlights on your Nissan NV200 are not bright enough, or because you have the sensation that they are too weak is a wise decision .
Adjusting the high beams of your Nissan NV200 for safety
First of all, the headlight adjustment of a Nissan NV200 must be achieved for a very easy safety motive. Whether it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to ignore an obstacle driving, or to predict a curve badly. However, if your headlights are too powerful, regardless if you are meant to switch to low beam lights when you cross a vehicle, the time needed to make this switch will generally expose the driver in front of you to the headlight beam of your Nissan NV200 . It is therefore necessary for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Nissan NV200 for legal reasons
In addition to safety, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Nissan NV200?
We will now move on to the section that interests you the most in this article, how to adjust the headlights of his Nissan NV200? This adjustment may appear a bit complicated, but by following the guidance you should have the ability to do it without too much concern.
Preparations to adjust the headlights of a Nissan NV200
First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure attentively.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all needless weight from the vehicle, only one person should be in the driver’s seat.
.
The headlight adjustment of his Nissan NV200
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the headlights of your Nissan NV200 (they are in most cases designated, and those on top must modify the verticality and the one on the side adjusts the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Nissan NV200 is logical, do not hesitate to check it after you have driven it, often it may move.
.
.
If you want to adjust the fog lights on your Nissan NV200, please read our content on this subject matter.
If you want more guides on the Nissan NV200, go to our Nissan NV200 category.
