Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these circumstances, there’s only one part of your car to take responsibility – your headlights, also named high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this basic manipulation, and in this article, we are going to discover how to adjust the headlights of your Nissan NV? To achieve this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Nissan NV.


Why adjust the headlights of your Nissan NV?

So let’s begin our article with the interest of adjusting the headlights of your Nissan NV. For many of us, our headlights are adjusted good enough, and they seem to light up enough after dark. Sadly this is not always the circumstance and examining this setting, either because the headlights on your Nissan NV are not bright enough, or because you have the feeling that they are too weak is a great idea .

Adjusting the high beams of your Nissan NV for safety

To begin with, the headlight adjustment of a Nissan NV must be made for a simple safety motive. Whether it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to miss out an obstacle on your way, or to anticipate a curve badly. On the other hand, if your headlights are too powerful, even if you are meant to switch to low beam lights when you pass a vehicle, the time required to make this change will most of the time expose the driver in front of you to the headlight beam of your Nissan NV . It is consequently essential for others as well as for you to have an optimal adjustment of your headlights.

Adjusting the headlights of a Nissan NV for legal reasons

Furthermore to safety, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.

How to adjust the headlights of a Nissan NV?

We will now go forward to the part that concerns you the most in this article, how to adjust the headlights of his Nissan NV? This setting may appear a bit difficult, but by following the guidance you should have the ability to accomplish it without too much issue.

Preparations to adjust the headlights of a Nissan NV

To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to executed:

  • Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Check your tire pressure attentively.
  • Check that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unneeded weight from the car, only one person should be in the driver’s seat.

The headlight adjustment of his Nissan NV

Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:

  • Open your hood, identify the screws for horizontal and vertical adjustment of the headlights of your Nissan NV (they are generally marked, and those on top must adjust the verticality and the one on the side adjusts the horizontality of the adjustment).
  • Use a cloth or different things to hide the projector on which you are not making the modification.
  • Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
  • Once finished, check that the headlights setting of your Nissan NV is coherent, do not think twice to check it after you have driven it, in some cases it may move.

If you want to adjust the fog lights on your Nissan NV, please browse our article on this subject.

If you wish more tutorials on the Nissan NV, go to our Nissan NV category.