If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these scenarios, there’s only one part of your vehicle at fault – your headlights, also called high beams. Nevertheless this adjustment might seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this basic manipulation, and in this article, we are going to see how to adjust the headlights of your Nissan Navara? To do this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Nissan Navara.

adjust-headlights-nissan-navara

Why adjust the headlights of your Nissan Navara?

So let’s start our article with the benefit of adjusting the headlights of your Nissan Navara. For the majority of us, our headlights are adjusted good enough, and they seem to light up enough at night. However this is not always the case and examining this setting, either because the headlights on your Nissan Navara are not bright enough, or because you have the feeling that they are too weak is a wise decision .

Adjusting the high beams of your Nissan Navara for safety

First of all, the headlight adjustment of a Nissan Navara must be achieved for a basic safety motive. Whether it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to ignore an obstacle driving, or to predict a curve badly. However, if your headlights are too powerful, regardless if you are meant to switch to low beam lights when you pass a car, the time needed to make this switch will generally expose the driver in front of you to the headlight beam of your Nissan Navara . It is therefore important for others as well as for you to have an optimal adjustment of your headlights.

Adjusting the headlights of a Nissan Navara for legal reasons

Furthermore to safety, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.

How to adjust the headlights of a Nissan Navara?

We will now go forward to the part that interests you the most in this article, how to adjust the headlights of his Nissan Navara? This adjustment might seem a bit difficult, but by simply following the recommendations you should be able to complete it without too much issue.

Preparations to adjust the headlights of a Nissan Navara

First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to put in place:

  • Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Verify your tire pressure cautiously.
  • Verify that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unneeded weight from the car, only one person should be in the driver’s seat.

The headlight adjustment of his Nissan Navara

Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:

  • Open your bonnet, identify the screws for horizontal and vertical modification of the headlights of your Nissan Navara (they are generally marked, and those on top must adjust the verticality and the one on the side adjusts the horizontality of the adjustment).
  • Use a cloth or different things to hide the projector on which you are not making the modification.
  • Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
  • .

  • With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once finished, check that the headlights setting of your Nissan Navara is coherent, do not think twice to check it after you have driven it, occasionally it may move.

.
If you want to adjust the fog lights on your Nissan Navara, please browse our article on this subject.

If you have any additional questions about the Nissan Navara, do not hesitate to consult our Nissan Navara category.