Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these situations, there’s only one part of your vehicle guilty – your headlights, as well known as high beams. Nevertheless this adjustment might seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this basic manipulation, and in this post, we are going to see how to adjust the headlights of your Nissan Murano? To achieve this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Nissan Murano.

adjust-headlights-nissan-murano

Why adjust the headlights of your Nissan Murano?

So let’s start our content page with the interest of adjusting the headlights of your Nissan Murano. For most people, our headlights are adjusted well enough, and they seem to light up enough during the night. Unfortunately this is not constantly the circumstance and checking this setting, either because the headlights on your Nissan Murano are not bright enough, or because you have the feeling that they are too weak is a great idea .

Adjusting the high beams of your Nissan Murano for safety

First of all, the headlight adjustment of a Nissan Murano must be achieved for a very easy safety motive. Whether it’s for you, or for the other users you come across during your night trips. Obviously, if you don’t see enough, the risk is to miss out an obstacle on the road, or to anticipate a curve badly. However, if your headlights are too strong, even if you are meant to switch to low beam lights when you cross a car, the time needed to make this change will most of the time expose the driver in front of you to the headlight beam of your Nissan Murano . It is consequently essential for others as well as for you to have an ideal adjustment of your headlights.

Adjusting the headlights of a Nissan Murano for legal reasons

In addition to safety, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.

How to adjust the headlights of a Nissan Murano?

We will now move on to the section that concerns you the most in this post, how to adjust the headlights of his Nissan Murano? This adjustment might seem a bit complex, but by simply following the guidance you should be able to do it without too much trouble.

Preparations to adjust the headlights of a Nissan Murano

First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to executed:

  • Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Check your tire pressure carefully.
  • Check that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Take out all needless weight from the automobile, just one person should be in the driver’s seat.

The headlight adjustment of his Nissan Murano

Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:

  • Open your hood, locate the screws for horizontal and vertical control of the headlights of your Nissan Murano (they are in most cases designated, and those on top must modify the verticality and the one on the side adjusts the horizontality of the adjustment).
  • Use a cloth or different things to hide the projector on which you are not making the correction.
  • Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
  • .

  • With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
  • Once finished, verify that the headlights setting of your Nissan Murano is coherent, do not hesitate to verify it after you have driven it, oftentimes it may move.

.
If you want to adjust the fog lights on your Nissan Murano, please go through our content page on this subject matter.

To get more tips on the Nissan Murano, take a look at the Nissan Murano category.