If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these circumstances, there’s only one part of your car at fault – your headlights, also often known as high beams. Nevertheless this adjustment might seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this simple manipulation, and in this article, we are going to discover how to adjust the headlights of your Nissan Micra 5? To do this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Nissan Micra 5.
Why adjust the headlights of your Nissan Micra 5?
So let’s start our content page with the interest of adjusting the headlights of your Nissan Micra 5. For most people, our headlights are adjusted sufficiently, and they appear to light up enough through the night. However this is not constantly the circumstance and examining this setting, either because the headlights on your Nissan Micra 5 are not bright enough, or because you have the impression that they are too weak is a great idea .
Adjusting the high beams of your Nissan Micra 5 for safety
To begin with, the headlight adjustment of a Nissan Micra 5 must be done for a very easy security motive. Regardless it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to miss an obstacle driving, or to anticipate a curve badly. However, if your headlights are too strong, regardless if you are expected to switch to low beam lights when you pass a car, the time needed to make this switch will most of the time expose the driver in front of you to the headlight beam of your Nissan Micra 5 . It is therefore essential for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Nissan Micra 5 for legal reasons
Furthermore to security, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Nissan Micra 5?
We will now go forward to the part that concerns you the most in this article, how to adjust the headlights of his Nissan Micra 5? This adjustment might seem a bit complex, but by simply following the recommendations you should have the ability to complete it without too much problem.
Preparations to adjust the headlights of a Nissan Micra 5
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to set up:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure attentively.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unnecessary weight from the automobile, only one person should be in the driver’s seat.
.
The headlight adjustment of his Nissan Micra 5
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your hood, find the screws for horizontal and vertical adjustment of the headlights of your Nissan Micra 5 (they are generally designated, and those on top must modify the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, verify that the headlights setting of your Nissan Micra 5 is coherent, do not hesitate to verify it after you have driven it, often it may move.
.
.
If you want to adjust the fog lights on your Nissan Micra 5, please go through our content page on this subject matter.
In the event that you have any additional questions about the Nissan Micra 5, do not hesitate to consult our Nissan Micra 5 category.
