If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these scenarios, there’s only one part of your car to take responsibility – your headlights, also often known as high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this simple manipulation, and in this article, we are going to find out how to adjust the headlights of your Nissan Maxima? To achieve this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Nissan Maxima.
Why adjust the headlights of your Nissan Maxima?
So let’s begin our content page with the interest of adjusting the headlights of your Nissan Maxima. For the majority of us, our headlights are adjusted good enough, and they appear to light up enough at night. Sadly this is not constantly the case and looking at this setting, either because the headlights on your Nissan Maxima are not bright enough, or because you have the sensation that they are too weak is a wise decision .
Adjusting the high beams of your Nissan Maxima for safety
To begin with, the headlight adjustment of a Nissan Maxima must be achieved for a basic safety explanation. Regardless it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to miss out an obstacle driving, or to anticipate a curve badly. Alternatively, if your headlights are too powerful, even if you are expected to switch to low beam lights when you pass a car, the time needed to make this switch will generally expose the driver in front of you to the headlight beam of your Nissan Maxima . It is therefore essential for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Nissan Maxima for legal reasons
In addition to safety, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Nissan Maxima?
We will now go forward to the part that interests you the most in this article, how to adjust the headlights of his Nissan Maxima? This adjustment may appear a bit difficult, but by simply following the instructions you should be able to accomplish it without too much concern.
Preparations to adjust the headlights of a Nissan Maxima
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to executed:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure attentively.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the vehicle, just one person should be in the driver’s seat.
.
The headlight adjustment of his Nissan Maxima
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your bonnet, find the screws for horizontal and vertical adjustment of the headlights of your Nissan Maxima (they are generally marked, and those on top must modify the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Nissan Maxima is coherent, do not hesitate to verify it after you have driven it, sometimes it may move.
.
.
If you want to adjust the fog lights on your Nissan Maxima, please go through our content page on this subject matter.
If you wish more tutorials on the Nissan Maxima, go to our Nissan Maxima category.
