Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these situations, there’s only one component of your car guilty – your headlights, as well identified as high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this basic manipulation, and in this post, we are going to discover how to adjust the headlights of your Nissan Leaf? To do this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Nissan Leaf.
Why adjust the headlights of your Nissan Leaf?
So let’s start our content page with the interest of adjusting the headlights of your Nissan Leaf. For the majority of us, our headlights are adjusted good enough, and they seem to light up enough after dark. Regrettably this is not always the case and examining this setting, either because the headlights on your Nissan Leaf are not bright enough, or because you have the sensation that they are too weak is a good idea .
Adjusting the high beams of your Nissan Leaf for safety
To begin with, the headlight adjustment of a Nissan Leaf must be made for a very easy safety motive. Whether it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to miss out an obstacle driving, or to anticipate a curve badly. However, if your headlights are too strong, even if you are expected to switch to low beam lights when you cross a car, the time required to make this change will most of the time expose the driver in front of you to the headlight beam of your Nissan Leaf . It is therefore important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Nissan Leaf for legal reasons
In addition to safety, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Nissan Leaf?
We will now go forward to the section that concerns you the most in this post, how to adjust the headlights of his Nissan Leaf? This adjustment may appear a bit complicated, but by following the recommendations you should be able to accomplish it without too much issue.
Preparations to adjust the headlights of a Nissan Leaf
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to executed:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the car, only one person should be in the driver’s seat.
.
The headlight adjustment of his Nissan Leaf
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical control of the headlights of your Nissan Leaf (they are generally marked, and those on top must adjust the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Nissan Leaf is coherent, do not think twice to check it after you have driven it, oftentimes it may move.
.
.
If you want to adjust the fog lights on your Nissan Leaf, please read our content page on this subject.
If you have any additional questions about the Nissan Leaf, do not hesitate to consult our Nissan Leaf category.
