Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these circumstances, there’s only one component of your vehicle to blame – your headlights, also often known as high beams. Although this adjustment might seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this basic manipulation, and in this post, we are going to see how to adjust the headlights of your Nissan Juke? To achieve this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Nissan Juke.
Why adjust the headlights of your Nissan Juke?
So let’s begin our article with the benefit of adjusting the headlights of your Nissan Juke. For most of us, our headlights are adjusted well enough, and they seem to light up enough at night. Unfortunately this is not always the circumstance and looking at this setting, either because the headlights on your Nissan Juke are not bright enough, or because you have the sensation that they are too weak is a good idea .
Adjusting the high beams of your Nissan Juke for safety
First of all, the headlight adjustment of a Nissan Juke must be done for a basic safety explanation. If it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to ignore an obstacle on your way, or to anticipate a curve badly. Alternatively, if your headlights are too powerful, even if you are supposed to switch to low beam lights when you pass a car, the time required to make this switch will most of the time expose the driver in front of you to the headlight beam of your Nissan Juke . It is therefore necessary for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Nissan Juke for legal reasons
Furthermore to safety, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Nissan Juke?
We will now proceed to the section that interests you the most in this post, how to adjust the headlights of his Nissan Juke? This adjustment might seem a bit complicated, but by following the recommendations you should be able to do it without too much trouble.
Preparations to adjust the headlights of a Nissan Juke
First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to executed:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure attentively.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unnecessary weight from the automobile, only one person should be in the driver’s seat.
.
The headlight adjustment of his Nissan Juke
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your bonnet, identify the screws for horizontal and vertical control of the headlights of your Nissan Juke (they are generally marked, and those on top must adjust the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Nissan Juke is logical, do not think twice to verify it after you have driven it, in some cases it may move.
.
.
If you want to adjust the fog lights on your Nissan Juke, please browse our article on this subject.
If you wish more tutorials on the Nissan Juke, go to our Nissan Juke category.
