If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these circumstances, there’s only one component of your vehicle to take responsibility – your headlights, as well named high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this basic manipulation, and in this article, we are going to discover how to adjust the headlights of your Nissan Altima? To get this done, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Nissan Altima.
Why adjust the headlights of your Nissan Altima?
So let’s begin our article with the benefit of adjusting the headlights of your Nissan Altima. For many of us, our headlights are adjusted sufficiently, and they appear to light up enough at night. Sadly this is not constantly the circumstance and checking this setting, either because the headlights on your Nissan Altima are not bright enough, or because you have the impression that they are too weak is a good idea .
Adjusting the high beams of your Nissan Altima for safety
First of all, the headlight adjustment of a Nissan Altima must be conducted for a simple safety reason. Regardless it’s for you, or for the other users you come across during your night trips. Obviously, if you don’t see enough, the risk is to miss an obstacle driving, or to anticipate a curve badly. Alternatively, if your headlights are too powerful, even if you are meant to switch to low beam lights when you cross a car, the time required to make this change will most of the time expose the driver in front of you to the headlight beam of your Nissan Altima . It is therefore essential for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Nissan Altima for legal reasons
In addition to safety, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Nissan Altima?
We will now move on to the section that concerns you the most in this article, how to adjust the headlights of his Nissan Altima? This setting may appear a bit complex, but by following the instructions you should have the ability to complete it without too much problem.
Preparations to adjust the headlights of a Nissan Altima
First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to executed:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unneeded weight from the vehicle, only one person should be in the driver’s seat.
The headlight adjustment of his Nissan Altima
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your bonnet, locate the screws for horizontal and vertical modification of the headlights of your Nissan Altima (they are in general marked, and those on top must adjust the verticality and the one on the side adjusts the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense component of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Nissan Altima is logical, do not hesitate to check it after you have driven it, in some cases it may move.
If you want to adjust the fog lights on your Nissan Altima, please read our article on this subject.
In the event that you have any additional questions about the Nissan Altima, do not hesitate to consult our Nissan Altima category.