Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these scenarios, there’s only one part of your car responsible – your headlights, as well identified as high beams. Nevertheless this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this basic manipulation, and in this post, we are going to see how to adjust the headlights of your Mitsubishi Mirage? To do this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Mitsubishi Mirage.
Why adjust the headlights of your Mitsubishi Mirage?
So let’s begin our content page with the interest of adjusting the headlights of your Mitsubishi Mirage. For many people, our headlights are adjusted well enough, and they appear to light up enough at night. Sadly this is not always the case and checking this setting, either because the headlights on your Mitsubishi Mirage are not bright enough, or because you have the impression that they are too weak is a wise decision .
Adjusting the high beams of your Mitsubishi Mirage for safety
To begin with, the headlight adjustment of a Mitsubishi Mirage must be carried out for a very easy safety motive. If it’s for you, or for the other users you come across during your night trips. Obviously, if you don’t see enough, the risk is to fail to see an obstacle on the road, or to predict a curve badly. On the other hand, if your headlights are too strong, regardless if you are meant to switch to low beam lights when you pass a vehicle, the time required to make this change will generally expose the driver in front of you to the headlight beam of your Mitsubishi Mirage . It is consequently essential for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Mitsubishi Mirage for legal reasons
In addition to safety, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Mitsubishi Mirage?
We will now move on to the section that concerns you the most in this post, how to adjust the headlights of his Mitsubishi Mirage? This setting may appear a bit complex, but by simply following the guidelines you should have the ability to do it without too much problem.
Preparations to adjust the headlights of a Mitsubishi Mirage
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure attentively.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unnecessary weight from the automobile, just one person should be in the driver’s seat.
.
The headlight adjustment of his Mitsubishi Mirage
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your hood, identify the screws for horizontal and vertical adjustment of the headlights of your Mitsubishi Mirage (they are in most cases designated, and those on top must modify the verticality and the one on the side adjusts the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Mitsubishi Mirage is coherent, do not hesitate to verify it after you have driven it, often it may move.
.
.
If you want to adjust the fog lights on your Mitsubishi Mirage, please browse our content page on this subject matter.
In the event that you have any additional questions about the Mitsubishi Mirage, do not hesitate to consult our Mitsubishi Mirage category.
