If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these circumstances, there’s only one component of your car to blame – your headlights, also known as high beams. Nevertheless this adjustment may appear easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this simple manipulation, and in this post, we are going to find out how to adjust the headlights of your Mitsubishi L200? To achieve this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Mitsubishi L200.

adjust-headlights-mitsubishi-l200

Why adjust the headlights of your Mitsubishi L200?

So let’s start our article with the interest of adjusting the headlights of your Mitsubishi L200. For the majority of us, our headlights are adjusted good enough, and they seem to light up enough at nighttime. Sadly this is not always the case and examining this setting, either because the headlights on your Mitsubishi L200 are not bright enough, or because you have the sensation that they are too weak is a wise decision .

Adjusting the high beams of your Mitsubishi L200 for safety

To begin with, the headlight adjustment of a Mitsubishi L200 must be finished for a very easy safety motive. Whether it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to miss an obstacle driving, or to anticipate a curve badly. However, if your headlights are too powerful, even if you are expected to switch to low beam lights when you pass a vehicle, the time needed to make this switch will most of the time expose the driver in front of you to the headlight beam of your Mitsubishi L200 . It is therefore important for others as well as for you to have an ideal adjustment of your headlights.

Adjusting the headlights of a Mitsubishi L200 for legal reasons

Furthermore to safety, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.

How to adjust the headlights of a Mitsubishi L200?

We will now move on to the section that concerns you the most in this post, how to adjust the headlights of his Mitsubishi L200? This setting may appear a bit complicated, but by following the guidelines you should have the ability to perform it without too much issue.

Preparations to adjust the headlights of a Mitsubishi L200

To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to set up:

  • Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Check your tire pressure attentively.
  • Check that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all needless weight from the automobile, only one person should be in the driver’s seat.

The headlight adjustment of his Mitsubishi L200

Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:

  • Open your bonnet, find the screws for horizontal and vertical control of the headlights of your Mitsubishi L200 (they are generally designated, and those on top must adjust the verticality and the one on the side handles the horizontality of the adjustment).
  • Use a cloth or another thing to hide the projector on which you are not making the modification.
  • Using the screws to make the horizontal modification, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once finished, check that the headlights setting of your Mitsubishi L200 is coherent, do not think twice to check it after you have driven it, occasionally it may move.

.
If you want to adjust the fog lights on your Mitsubishi L200, please go through our article on this subject matter.

If you wish more tutorials on the Mitsubishi L200, go to our Mitsubishi L200 category.