If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these cases, there’s only one part of your vehicle responsible – your headlights, as well identified as high beams. Nevertheless this adjustment may appear easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this elementary manipulation, and in this article, we are going to see how to adjust the headlights of your Mini Mini 3? To do this, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Mini Mini 3.
Why adjust the headlights of your Mini Mini 3?
So let’s start our content page with the benefit of adjusting the headlights of your Mini Mini 3. For most of us, our headlights are adjusted sufficiently, and they seem to light up enough through the night. Unfortunately this is not always the circumstance and looking at this setting, either because the headlights on your Mini Mini 3 are not bright enough, or because you have the sensation that they are too weak is a good idea .
Adjusting the high beams of your Mini Mini 3 for safety
To begin with, the headlight adjustment of a Mini Mini 3 must be conducted for a simple safety explanation. Whether it’s for you, or for the other users you come across during your night trips. Obviously, if you don’t see enough, the risk is to ignore an obstacle driving, or to anticipate a curve badly. Alternatively, if your headlights are too strong, even if you are expected to switch to low beam lights when you cross a vehicle, the time needed to make this switch will generally expose the driver in front of you to the headlight beam of your Mini Mini 3 . It is therefore essential for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Mini Mini 3 for legal reasons
Furthermore to safety, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Mini Mini 3?
We will now go forward to the part that concerns you the most in this article, how to adjust the headlights of his Mini Mini 3? This adjustment may appear a bit complex, but by following the recommendations you should have the ability to perform it without too much trouble.
Preparations to adjust the headlights of a Mini Mini 3
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to set up:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure attentively.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unneeded weight from the vehicle, just one person should be in the driver’s seat.
.
The headlight adjustment of his Mini Mini 3
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical control of the headlights of your Mini Mini 3 (they are in general designated, and those on top must modify the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Mini Mini 3 is logical, do not hesitate to check it after you have driven it, occasionally it may move.
.
.
If you want to adjust the fog lights on your Mini Mini 3, please go through our content page on this subject matter.
If perhaps you have any additional questions about the Mini Mini 3, do not hesitate to consult our Mini Mini 3 category.
