If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these situations, there’s only one part of your car responsible – your headlights, also called high beams. Nevertheless this adjustment may seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this basic manipulation, and in this article, we are going to discover how to adjust the headlights of your Mini Countryman 2? To do this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Mini Countryman 2.
Why adjust the headlights of your Mini Countryman 2?
So let’s begin our article with the benefit of adjusting the headlights of your Mini Countryman 2. For most people, our headlights are adjusted sufficiently, and they seem to light up enough through the night. Unfortunately this is not constantly the circumstance and checking this setting, either because the headlights on your Mini Countryman 2 are not bright enough, or because you have the sensation that they are too weak is a great idea .
Adjusting the high beams of your Mini Countryman 2 for safety
To begin with, the headlight adjustment of a Mini Countryman 2 must be finished for a very easy security explanation. If it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to miss out an obstacle while traveling, or to predict a curve badly. However, if your headlights are too powerful, regardless if you are expected to switch to low beam lights when you cross a vehicle, the time needed to make this change will most of the time expose the driver in front of you to the headlight beam of your Mini Countryman 2 . It is therefore essential for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Mini Countryman 2 for legal reasons
In addition to security, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Mini Countryman 2?
We will now go forward to the section that interests you the most in this article, how to adjust the headlights of his Mini Countryman 2? This setting may seem a bit complex, but by following the recommendations you should have the ability to perform it without too much concern.
Preparations to adjust the headlights of a Mini Countryman 2
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to set up:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure attentively.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unneeded weight from the automobile, only one person should be in the driver’s seat.
.
The headlight adjustment of his Mini Countryman 2
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your hood, locate the screws for horizontal and vertical adjustment of the headlights of your Mini Countryman 2 (they are in most cases designated, and those on top must modify the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly down below.
- Once finished, check that the headlights setting of your Mini Countryman 2 is coherent, do not think twice to check it after you have driven it, occasionally it may move.
.
.
If you want to adjust the fog lights on your Mini Countryman 2, please read our article on this subject matter.
If you need more guides on the Mini Countryman 2, go to our Mini Countryman 2 category.
